H. Östberg
Saved
  1. Products
  2. Air handling units
  3. Energy recovery units
  4. Side connected
  5. HERU S EC
  6. HERU 100 S EC (Archived 2015)

HERU 100 S EC (Archived 2015) Updated: 2019-11-19 Archived product

_ - HERU 100 S EC

The energy recovery unit HERU®100 S EC is designed for supply and exhaust air ventilation combined with heat and cool recovery.

HERU®100 S EC can be used in homes, offices, apartments etc. where there is a need for:
-high temperature efficiency
-energy saving
-low sound levels
-safe operation

HERU®100 S EC has
- a rotating heat exchanger, of non-hygroscopic type and is manufactured of aluminum, placed centrally in the unit. The heat exchanger has a temperature efficiency of up to 86%.
- backwardcurved centrifugal fans with maintenance free EC external rotor motors, which are easy to remove for cleaning.
- has built-in control for heating/cooling.
- can be fitted with a built-in electric heater 1200 W or 600 W.
- as standard bagfilter F7.
- a wireless remote controller for the operation and monitoring of the unit.
- a double skinned galvanised sheet steel casing with 50 mm intermediate insulation

The HERU®100 S EC can be mounted in either warm or cold space.

The HERU®100 S EC is delivered galvanised as standard

HERU®100 S EC is operated via a wireless remote controller which can operate and to preset the required parameters as well as monitor the unit’s status. The operating range is approximately 50 meters. The antenna which is placed next to the unit can have the range reduced if there are heavy reinforcing bars in the concrete structure and it should then be moved either to a position where the signal is not shielded or nearer to the controller.

The HERU®100 S EC unit is equipped with a wall plug.

NOTE!
The warranty of HERU® is only valid if accessories/equipment (e.g. filters) from H. Östberg AB are used.